Le but de ce projet est de réaliser un système de détection de dépassement de seuil en temps réel permettant de calculer la durée de chaque étape d’un cycle de gravure à partir d’un signal échantillonné. Le logiciel est configurable pour une multitude de recettes de micro fabrication et permet de sauvegarder les résultats pour […]
By using LabVIEW and TestStand, we were able to build a generic librairy that would enable to read/write CAN message based on the SAE J1939 standard for our customer. This librairy was architected to interface with multiple UUTs at the same time with no effort. And finally, there was a utility to monitor all CAN […]
The goal was to automate the alignment of the Fine Guidance Sensor of a telescope. The final system aligned several telescopes mounted in an aluminum structure that is required to withstand space conditions (in a near vacuum and at -250°C). One of the goals for this system was to find the exact position of each […]
The goal of the optical fiber inspection project is to detect defaults during manufacturing in order to mark it and not ship these out of specification fiber. The inspection is done using two cameras at 90 degrees apart. This application also detects concentricity errors (in percent) of the cladding and the coating of the optical […]
The goal of this project is to detect and correct any textile tissue misalignment in real-time during manufacturing. Misalignment detection involves capturing images of the fabric layers and then processes them to determine if the alignment is within the specification. Since the assembly line is very fast, the analysis algorithm had to keep their executing […]
Besoin d’informations complémentaires ?
Remplissez notre formulaire et l’un de nos experts vous recontactera au plus vite.
Site web développé par
Need more information?
Fill in our online contact form and one of our expert will contact you.
Website developed by
